They trust us









OPAQUE WALLS : the end of opportunistic theft
Unlike openwork shelters, the Grove conceals its contents.
The side and rear walls are completely solid. We don’t see the value of bikes from the outside. This visual opacity is one of the most effective ways to reduce attempted theft in public spaces and schools.
Ideal for sites where discretion is a security priority.
A BICYCLE SHELTER sustainable and chemical-free
Thermowood®: sustainable, without chemical treatment.
Treated only by high temperature, this wood becomes naturally rot-proof. It does not contain any products toxic and is PEFC/FSC certified.
Repeated staining, risk of early rotting.
Zero maintenance, noble and natural graying.
REINFORCED RAIN PROTECTION
Keep stools dry, even in side winds.
With 2.5m deep, bikes remain safe, even in an open shelter:
- Roof: Ribbed steel tray with anti-condensation felt.
- Evacuation: Integrated gutter collecting water towards the rear posts.
- Cleanliness: No splashes on the walls, prolonging visual durability.
Technical specifications outdoor bike shelter:
Structural guarantee: 5 years
MATERIALS
- High strength S235 steel
- A2 stainless steel screws supplied
- Hot dip galvanized or powder coated
- Wood: Heated Thermo-wood
STRUCTURE
- Beams: 120 x 60 mm
- Posts: 80 x 80 mm
- Plates: 200 x 200 mm
- Adjustable feet (+/- 15cm)
RESISTANCE
- Wind: 110 km/h (Eurocodes)
- Snow: 180 kg/m²
- Certified EN 1090-1
- Salt resistance (if galvanized)
ECO-IMPACT
- Recyclability: 100%
- FSC/PEFC certified wood
- Life cycle > 20 years
- CO2 Ladder: Level 3
CUSTOMIZATION & OPTIONS
Adapt your Bosquet wooden bike shelter to your needs
DIMENSIONS & MODULARITY
Interactive dimension plan
From a 5-seater bike shelter to a 50+ bike room with double-decker racks.
| Length (m) | 4m | 5m | 6m | 7m | 8m | 10m | Custom made |
|---|---|---|---|---|---|---|---|
| Capacity (bicycles) | 8-10 | 12-14 | 16-18 | 20-22 | 24-26 | 30-32 | Contact us |
PLUS version
2,78m
Double Deck Compatible.
Optimizes space and doubles parking capacity.
I choose this versionFAQ Wooden bike shelter Grove
All the answers about our outdoor Thermowood bike shelter
A 15 cm thick concrete slab is ideal. Otherwise, concrete pads measuring 50x50x50 cm under each post are required. The shelter is fixed via high-strength mechanical anchors on steel plates.
For a floor area of less than 20 m² (i.e. approximately an 8m long shelter), a simple Prior Declaration of Works (DP) in town hall is enough. Beyond that, a permit may be necessary. We can provide the plans for your file.
Yes, like any wood exposed to UV without surface chemical treatment, the Thermowood will take on a shade uniform silver gray after 6 to 12 months. This in no way alters its structural resistance and gives it a much appreciated architectural appearance.
The average delay is 8 to 10 weeks after validation quote and colors. The shelter is delivered as a kit on a pallet, ready to assemble. We also offer an installation service throughout France.
Yes, this is the advantage of PLUS version (2.78m). It allows you to install of double height bike racks to double parking capacity. Ideal for train stations, university campuses and large companies that are short on floor space.
Yes, the Grove can be equipped with options for electric bike charging : pre-wired IP55 terminals or autonomous solar kit with integrated photovoltaic panel. An ideal solution for a solar bike shelter 100% autonomous.
Ready to install your wooden bike shelter?
Our advisors will assist you with the costing and the subsidy file.
Similar products
These other products may interest you
Wherever your site is located, we can install.
We support companies and public authorities from site assessment through final installation, with coordinated teams and partners across the entire country.
See our installations ➜
SOME INSTALLATIONS
Discover the latest updates from our company!






